We have 3 machines here that had failures to the fuel pump bracket .
They vibrate pretty good till it snaps the bracket
There is a kit available if it does fail .
Hmm took a while to figure out that the original J clip was never installed on all three machines which maybe why they failed in the first place .
My fuel lines were all zip tied of to the side
Snipped ties off and run fuel line to location in directions .
J clip goes on top bolt of clutch cable bracket .
Padded J clip
New bracket installed . Not much of a difference or thickness
Rerouted line hooked back up . took 15 minutes . bracket bolts tighten up easily from underside .